The radiator is an important part of the unit, and it undertakes the important task of dissipating heat for the unit. In order to ensure that the radiator can properly perform its cooling function and cool down normally, the following measures can be taken. Chunfeng radiator new art supplier Xiaobian will take you to understand .
1. When installing the unit, place the radiator as close to the exhaust as possible to prevent recirculation of hot air. If there is no air duct, the distance between the radiator and the air outlet should not exceed 150mm.
2. The air inlet and outlet of the building are generally equipped with grids and shutters, so the calculation of the size of the air outlet needs to consider the effective ventilation area of ​​the grids and shutters.

3. The air outlet generally needs to install air ducts and exhaust louver fans, and the area of ​​the entire air outlet is about 1.5 times that of the radiator.
4. It is recommended to set the area of ​​the air inlet to twice the cooling area, and take precautions against rain.
5. The bending of the air duct requires appropriate elbows. If the pipeline is too long, it needs to be enlarged to reduce the exhaust back pressure. In addition, it is necessary to specially design long-distance air duct silencers according to the characteristics of different buildings. The normal performance of the heat dissipation function of the unit is inseparable from the cooperation between the various components of the unit. Only when the installation and operation of these components are within a reasonable range can they closely cooperate with each other and work together to ensure the normal operation of the unit.
The above is the editor of Chunfeng radiator new art supplier: a brief introduction to the heat dissipation knowledge of the radiator.