The Bearing cap prices china tells you the structural features of the bearing cap. The structure of the bearing end cover has two types: embedded and flanged, each of which is divided into a blind cover and a transparent cover. 1. The Bearing cap prices china tells you that the embedded bearing end cap has a simple and compact structure and does not need fixing screws. The outer diameter is small, the weight is light, and the outer secondary shaft is short in size. However, it is difficult to assemble and disassemble the end cover and adjust the bearing clearance, and the sealing performance is poor. Grooving on the seat hole is time-consuming to process. Embedded bearing end caps are mostly used in occasions with light weight and compact structures.

2. The Bearing cap prices china tells you that the flange type bearing end cover is more convenient to install, disassemble and adjust the bearing clearance, and the sealing performance is also good. So it is widely used. But the disadvantage is that the outer size is large, and a set of screws is needed to connect.
The Bearing cap prices china tells you that when the fit between the end cap and the hole is longer, in order to reduce the contact surface, a section of smaller diameter is cast or turned in Ruibu, but a sufficient length e1 must be reserved. Generally, the matching length here is e1=(0.10-0.15) D, where D is the outer diameter of the bearing. The δ value is also to reduce the processed surface.
Through the above introduction and analysis of the Bearing cap prices china, hope it helps you.